What Ice Axe Loops Do on a Backpack
Ice axe loops give your axe a dedicated place on your pack instead of leaving you to improvise with compression straps or your hands. On a backpack, the setup is simple: a loop at the bottom holds the head of the axe, while a shock cord band at the top keeps the handle tight against the pack. That two-point hold is what turns a loose tool into a carried one.
If your adventure calls for traveling along snowy ridgelines or climbing icy peaks, ice axe loops are the perfect addition to your backpack. The loops also keep your hands free for trekking poles, rock moves, or a map on the approach.
Where the Loops Sit and Why Both Sides Matter
A pair of loops attaches at each side of the pack, which means you can secure two ice axes at once. That placement matters for balance and access: one axe on each side keeps the load symmetrical, and you can reach either tool without swinging the pack around. For a single axe, you still choose the side that matches your handedness and the terrain you expect.
The loops can all come off when you aren't carrying axes. That removable design is the practical advantage for ultralight pack accessories: you keep the hardware only for the trips that need it, rather than carrying empty loops through summer trails.
Zpacks Ice Axe Loops: What the Pair Provides
- Ice Axe Loops (Both Sides of Pack): A pair of loops are attached at each side of the pack for securing two ice axes. This tells you the pair is designed for two-axe carry, so you can plan placement for one tool or two without adding a second accessory.

Ice Axe Loops (Both Sides of Pack) - Ice Axe Loops (Both Sides of Pack): The head of each axe secures through a loop at the bottom, and the handle is kept tight at the top with a shock cord band. This is the attachment method: bottom loop for the head, top shock cord for the handle. It explains why the axe stays oriented and tight against the pack.
- Ice Axe Loops (Both Sides of Pack): The loops can all come off when you aren't carrying axes. Removability supports an ultralight approach: add the loops for snowy or icy objectives, then strip them for trips where an axe stays home.
How to Attach an Ice Axe to the Loops
The supplied product information describes the hold in two points: the head through the bottom loop, the handle under the top shock cord band. Follow that order so the axe sits the same way each time.
- Place the axe head through the bottom loop: Feed the head of the axe through the loop at the bottom of the pack side. This is the load-bearing point described in the product details.
- Tuck the handle under the top shock cord: Keep the handle tight at the top with the shock cord band. The band holds the shaft against the pack rather than letting it swing.
- Repeat on the other side for a second axe: Because loops are attached at each side, you can secure two axes using the same bottom-loop and top-cord method on each side.
- Check the hold before you move: With the head captured below and the handle tensioned above, the axe should sit against the pack. The supplied information does not include a specific tension or fit test, so confirm the arrangement yourself before hiking.
When to Add the Loops and When to Take Them Off
Add the loops when your route involves snowy ridgelines or icy peaks and you plan to carry an axe. The pair supports one axe per side, so a two-axe day is covered by the same setup. Remove them when you aren't carrying axes; the product details state the loops can all come off, which keeps your pack configuration lean for trips that don't call for winter tools.
One honest limitation: the supplied information does not include weather ratings, compatibility with specific pack models beyond the product's own fit, or safety-critical setup instructions. Treat the loops as a carry accessory and use your own judgment for conditions and attachment security.
A Note on Fit and Ultralight Pack Setup
The product details include a customer comment that the loops fit the pack and the axe perfectly, but fit can vary with your pack and tool. The loops are listed as a standard variant, and the supplied information does not provide dimensions or a compatibility list. If you are matching them to a specific pack, check the mounting points on your pack before relying on the loops for a trip.
For ultralight packing, the value is in the removable design: you carry the loops only when the itinerary includes an axe. That keeps your base weight lower on trips where the tool stays behind, without forcing you to choose between a dedicated axe carry and a stripped-down pack.


